Uniaxial Geogrid
Material：PP、PE
Feature：high tensile strength、good creep resistance、stable chemical properties
Application Field：highway subgrade, railway, tunnel, airport, port, dock
Shipping Method：logistics
Product Category：Geogrid
Uniaxial plastic geogrid is a mesh-type geotechnical material manufactured using polypropylene (PP) or polyethylene (PE) as the primary raw material, with the addition of UV inhibitors and anti-aging agents. It is produced through extrusion and unidirectional stretching processes, endowing the product with high uniaxial tensile modulus and tensile strength.
Performance
Uniaxial geogrid has high tensile strength, good creep resistance, and stable chemical properties; The characteristic of convenient and fast construction.
Application
Uniaxial geogrids are primarily used for soft soil foundation treatment in highway subgrades, railways, tunnels, airports, ports, and dock engineering. They are also suitable for reinforcing pavements, embankments, and river levees, as well as for repairing and controlling landslides and collapses.
Specifications
Technical Parameters of Polypropylene (PP) Uniaxial Geogrids
| project | TGDG35 | TGDG50 | TGDG80 | TGDG120 | TGDG160 | TGDG200 |
| Tensile yield strength per meter in both longitudinal and transverse directions (kN/m) | 35 | 50 | 80 | 120 | 180 | 200 |
| Yield elongation per linear meter in both longitudinal and transverse directions≤（%） | 10 | |||||
| The tensile force at 2% elongation per linear meter in both longitudinal and transverse directions is ≥ KN/m | 10 | 12 | 26 | 36 | 45 | 56 |
| The tensile force at 5% elongation per linear meter in both longitudinal and transverse directions is ≥ KN/m | 22 | 28 | 48 | 72 | 90 | 112 |
Technical parameters of polyethylene (PE) uniaxial tensile plastic geogrid
| project | TGDG35 | TGDG50 | TGDG80 | TGDG120 | TGDG160 |
| Tensile yield strength per meter in both longitudinal and transverse directions (kN/m) | 35 | 50 | 80 | 120 | 160 |
| Yield elongation per linear meter in both longitudinal and transverse directions≤（%） | 11.5 | ||||
| The tensile force at 2% elongation per linear meter in both longitudinal and transverse directions is ≥ KN/m | 7.5 | 12 | 21 | 33 | 47 |
| The tensile force at 5% elongation per linear meter in both longitudinal and transverse directions is ≥ KN/m | 21.5 | 23.5 | 40 | 65 | 93 |
